|
|
|
The RIVERCLACK® System - The solution for flat-low slope roofs
The flat roof metal covering RIVERCLACK® is the solution, in industrial as well as in civil building, which complies with the latest architectural trends.
Thanks to its essential shape, aesthetic, constructive economies and outstanding technical properties, RIVERCLACK is the perfect balance between technology and appearance. 
Riverclack is a concealed fixing standing seam roofing system, worldwide patented by ISCOM, and it’s the result of constant research and testing which have seen it used in pan-European large-scale projects for over twenty years. Bringing together the structural performance levels of high tensile metals and truly innovative geometry, its unique drainage joint is guarantee of full waterproofing whilst its original fixing system allows an incredible installation speed, free thermal moviments and an electric and thermal break between the roof and the below structure. The panels 550mm wide are manufatured in customized continuous lengths both in the factory and on site.
RIVERCLACK SYSTEM IN SEVEN POINTS
1. FULLY WATERPROOF
Thanks to the draining joint, free of sealant and gaskets, this roof system is fully watertight even if it is flooded.
2. PERFORATIONS LESS LOCKING SYSTEM
Metal sheets are fixed on the below support structure without any through holes allowing a free thermal expansion. Projects with sheets length more than 100 m have been realized so far.
3. DURABILITY
The sheets made of aluminium, copper or stainless steel are unchangeable in time and their durability will be more than hundred years. All elements are 100% recyclable.
4. WALK – ABILITY
It’s free in any sheet’s area, walking doesn’t leave any deflection even after many carelessness tramples.
5. EASY INSTALLATION
Fast, mark out free, and also easy for non skilled labour.
6. LOW COSTS
Long-life, no maintenance and installation quickness are the properties that make it low cost either for big or for small works.
7. SELFBENDING
RIVERCLACK sheets can self curve down to a 20 m minimum radius (mill finish aluminium thickness 0,7), simply by fixing the system while following the curve shape of the below structure. |
|
© Copyright 2010 ISCOM SPA
Via Belvedere, 78 - 37026 - PESCANTINA - VERONA - ITALIA C.F. e P.I. 00251170239 - Reg.Imp. VR n. 00251170239 - R.E.A. VR n. 124122 - Cap.Sociale 1.008.000 euro int. ver. e-mail: iscom@iscom.it - Add to Bookmarks |
|