RA110

MATERIALS 

• Polyamide

SUITABLE FOR 

• Riverclack® 500 
• Riverclack® 550 

INCLUDED COMPONENTS

N° 2 stainless steel screws:

•  (*)"S" installation on steel (max thickness 4 mm): ⌀5,5x60 mm self-tapping screw (WÜRTH 012355 60 - PR3) 
•  (*)"W" installation on wood: ⌀6,0x80 mm screw (WÜRTH WOPOFAST 01826 80- PZD3)

NOTES

• In case of installation on steel: 4 mm max thickness 
• To be used in the ridge area only 
• For < 20 m length straight sheets
• For sheets longer than 20 m, high snow loads, permanent loads (i.e. machinery), or tolerances in the structure that are excessively wide: use two RA 110. For these applications, please refer to fixed point guidelines or contact ISCOM 
• For applications with two RA 110, installation is recommended on purlins placed in the same fixed point area (max distance: 2,00 m) 
• In case of curved sheets, contact the ISCOM technical department
• When ordering, specify the type of screw needed 
• It is always advised for the design process to be carried out by a competent technician, excercise extra caution lo loads caused by extreme weather conditions

INSTALLATION ADVICE

• For < 5% pitches, secure the back end of the drainage channel with silicone 
• Drill a 5 mm core hole before screwing
• Do not put strain on the block during the drilling/screwing process