Clean the attachment mounting zone on the panel from dirt and debris, degrease the panel rib sides with proper solvents (eg. a 50/50 mixture of water and isopropyl alcohol or n-heptane)
Attachment installation is not recommended when sheet temperature is lower than 10 °C
The max adhesion strength is reached after about 72 hours after installation
Make sure there is no condensation on the sheet surface before installation
When installing, keep the item at least 150 mm away from any fixing clip
It's recommended to quickly install the attachment; in case of storage avoid exposure to direct sunlight and the elements
Installation shall not be performed on the protruding end zones of the panel
It is always highly recommended that the design is carried out by a competent technician, beware of loads caused by extreme weather conditions
About Us 
Why Riverclack® 
Systems 
Technical Support 
Projects 
Designed for 
Contacts 
Join Us