Optimal sheet temperature for application ranges between 25 and 40 °C; ISCOM doesn’t recommend installation in case of sheet temperature lower than 10 °C
Maximum adhesion force is achieved 72 hours after installation.
Before installation, make sure the application surface is dry and clean by using proper solvent, e.g. mixture composed of water (50%) and isopropyl alcohol or heptane (50%).
ISCOM recommends installing the attachment as soon as possible after sheet installation
In case of storage, avoid exposure to sunlight or the elements
Installation shall not be performed on the protruding end zones of the panel
It is always highly recommended that the design is carried out by a competent technician, beware of loads caused by extreme weather conditions
About Us 
Why Riverclack® 
Systems 
Technical Support 
Projects 
Designed for 
Contacts 
Join Us